Email Setup Non Outlook
Posted by S2C Staff, Last modified by S2C Staff on 09 July 2016 02:54 PM
Email Software Setup Guide
Mailbox Setup Guide
Setting up a Standard mailbox only takes a few minutes. You can set up any email software to receive email from your mailbox. This guide will show you step by step how to set up the most common mail software to work with your new mailbox.
You can connect to your mailbox using either the POP3 or IMAP protocols. As a rule of thumb it is better to use POP3 if only one computer accesses your mailbox, while it is better to use IMAP if you have a number of computers that will access your mailbox. This guide will show you step by step how to set up the most common mail clients to work with your new mailbox, using whichever protocol you prefer.
Before you Start
Before you set up your email software, there are certain things you will need:
Software Covered in this Guide
Service2Client recommends secure connections to our email servers.
Setting up Windows Live Mail
Step 1 Open Windows Live Mail. Click Tools, then Accounts in the drop down menu.
Step 2 The Accounts window will open. Click Add in the top right corner.
Step 3 Select E-mail account and click
Step 4 Enter your full email address. This made up of the mailbox name you chose, an @ symbol and your domain name. In the next text box, enter your mailbox password.
Finally, enter a display name. This is what most email users will see in their inboxes instead of your email address.
Check the box marked Manually configure server settings for e-mail account. And click Next.
Step 5 Depending upon how you would like to connect, ensure that either POP3 or IMAP are
selected from the drop down list and enter the following details.
Step 6 In the Outgoing server Information section you should enter Enter mail.yourdomain.com (replacing yourdomain.com with your domain name). Then click Next.
Step 7 Click Finish to set up your account, and close the new account wizard. Windows Live Mail is now configured to receive email from your Standard mailbox and send email through your ISP’s mail server.
Setting up Thunderbird
Step 1 Open Thunderbird.
Note: You may be asked if you want to import settings from other email
software, such as Outlook Express. This guide shows you how to set up a
new mailbox from scratch.
Step 2 The Account Wizard will open, if you don't have any other mailboxes set up in
If the wizard does not open automatically, click Account Settings in the Tools menu.
Step 3 Click the Add Account
Step 4 Select the Email account
radio button, then click Next.
Step 5 Enter your name in the Your Name text-box. This is what most people will see when you send them an email.
Then enter your email address in the Email Address text-box, and click the Next button.
Step 6 Depending upon your favored connection type, check POP or IMAP as the incoming server type.
Enter your mail server in Incoming Server text-box. This is your domain name with "mail." added to the
front. For example mail.yourdomain.com Then click Next.
Step 7 Enter mail.yourdomain.com for your SMTP server address in the Outgoing Server text-box, then click
Step 8 Enter your full email address in the Incoming User Name. Then click Next.
Step 9 Use the Account Name text-box to enter the name you want to use to identify this account,
then click Next. This name will only be visible to you.
Step 10 Confirm the details you have entered, click Finish, then click OK to close the
Account Settings window.
Thunderbird is now configured to receive email from your Standard mailbox and send
email through your ISP’s mail server.
Setting up Mac Mail
Step 1 Open Mac Mail.
Step 2 Click Preferences from the Mail menu.
Step 3 Click the Create an account button to open the Add Account wizard. This is
located under the Accounts list, on the bottom-left of the window.
Step 4 Enter your name in the Full Name text-box. This is what most people will see when you send them
an email. Type your email address in the Email Address text-box. Enter the password for the mailbox in the
Password text box. Click the Continue button.
Step 5 On the Incoming Mail Server page, enter the following information:
Click the Continue button when you are done.
Step 6 On this screen you should enter the SMTP settings mail.yourdomain.com.
Click Continue when you have filled out this information.
Step 7 Confirm the details you have filled out, and click the Create button.
8. Service2Client recommends secure connections to our email servers.